Another Picture Of The Finished Kitchen

This is another image of the finished Medway, Ma kitchen remodel. It has nice lighting and really shows off the round top Andersen window. It also shows just how nicely that whole side of the room was tied together with the round top window and the hutch style cabinetry, as well as good interior design by the homeowner. The one recessed light that is on directly over the window lights this scene just perfectly, doesn’t it?

You can see the entire gallery for this project here.

The Kitchen Remodel Is Done

Here is  nice picture of the completed kitchen remodel. If you compare this image with the image of the original kitchen and dining room area from the first article in this series, you can really get a good idea of the scope of this project and just how far this kitchen and dining room area has come.

The beautiful cherry cabinets were custom built by Heartwood Cabinets, located Mendon Massachusetts. Instead of going with typical, standard cherry cabinets like those from a box store such as Home Depot, this customer decided to spend the money and put some truly gorgeous custom cherry cabinets in their new kitchen complimented by stunning granite countertops. Did it cost more to go with the custom cabinets and granite countertops as opposed to standard or semi-custom cabinets with a laminate countertop? Of course it did. Quite a bit more in fact. Was it worth it? Absolutely.

What some people don’t realize is that certain rooms of your house, when remodeled, will return the majority of your investment in terms of added equity in the house. That is almost always the case with a kitchen remodel or a bathroom remodel. In general when you remodel your kitchen you can expect a 75% to 90% return on your investment. That’s not a bad return at all considering you’re getting the kitchen of your dreams!

Demo & Framing The Affected Area

There was a lot of demo involved with this project. We filled a 30yd dumpster in no time. We began by removing the existing kitchen base cabinets and wall cabinets. The only real consideration when demoing the cabinets was the plumbing service to the sink and dishwasher (all appliances had already been removed). Most customers are not interested in trying to save old cabinets, which is good for us (saves time) and for the customer (saves money). So into the dumpster went the old cabinets.

Next we removed the existing flooring in the 2 affected rooms: the kitchen, and the dining room. The existing kitchen had a linoleum floor with a 1/4″ plywood underlayment. We removed the linoleum and underlayment at the same time, not only is it easier that way, but also we would be installing a new 1/2″ plywood underlayment that would cover both rooms. The dining room had a hardwood floor that was actually in beautiful shape, however it didn’t fit with the new design so it also went into the dumpster. We did save some of the old hardwood flooring to be used when tying together the remodeled kitchen and dining room with the existing living room.

After the old flooring and cabinets were removed, it was time to move on to getting rid of the two walls that separated the kitchen from the dining room and lining room. One of the walls was structural and the other was not. In order to remove the structural wall we framed a temporary wall on the living room side of the structural wall to be removed. This temp wall supported the living room ceiling joists (remember we removed the kitchen & dining room ceiling joists to create the cathedral ceiling) and any additional load on them, while we removed the structural wall and installed a laminated beam to replace it, along with a laminated post that would transfer some of the load down to an existing, appropriately sized beam in the basement. Here is a picture of before the walls were removed, and here is one of after the beam was installed and the project is completed.

Now that the laminated beam was in place it was time to frame the cathedral ceiling. If you look at the picture you will notice that the existing roof rafters are on the left and the new ones are on the right. Notice how the new rafters span from the midpoint of the existing rafters to the newly installed beam on the right, transfering the load quite nicely. The framing isn’t 100% complete in this picture but its close, we still need to add the collar ties to the new cathedral ceiling as well as some strapping for the sheetrock.

The round-top window is also all framed up, as you will notice. Although still there in this picture, the existing wallboard you see to the left and right of the window will be replaced. We also installed a laminated header to carry the load over the window.

If you are interested in more information on load bearing walls, here is another article that focuses particularly on identifying their location in your house.

Before The Remodeling Started

This is the beginning of a project we did a while back for a family in Medway, Ma. We had a lot of fun doing it, these customers could not have been more friendly or courteous and at the end of it they had a beautiful new kitchen and dining room that provided everything they had been wanting.

When you look at the picture of the original area to be remodeled above, you will see the dining room on the right and the kitchen on the left. There is also a sunroom that you will notice through the dining room (we did some work in the sunroom as well, but that’s for another time). Now, of course, in this picture you can’t really see the kitchen. All that you can see is the doorway on the left, that enters into the kitchen, and the doorway on the left side of the dining room, which also enters into the kitchen. That was one of the main things that this customer was hoping to change about their kitchen/dining room area, to open it up to the other adjacent common areas of the house, i.e. the living room and sunroom.

We would achieve this openness by removing the walls around the kitchen and replacing the one load bearing wall with a post and beam setup that would span half the length of the house. I love these kinds of projects! In addition they wanted as much as of a cathedral ceiling as was possible inside of the affected area. Can do.

We achieved the cathedral ceiling by removing the existing ceiling joists and installing new rafters that went from the new beam to the midpoint of the existing roof rafters. Although we did have to add additional support to the existing undersized rafters, we still got our proper insulation r-value by using foam board insulation in layers. Creative engineering indeed. My design engineer earned his money on this one, and we got it done right and tight!

Another highlight was a brand new rounded-top Andersen picture window that we installed. The rounded-top was fitted with beautiful custom stained glass. You don’t have to wait for me to talk about them to see more pictures of this job. Visit the gallery for this project here. It also has pictures that I won’t necessarily be discussing specifically in an article, enjoy.

Up next: demo is done, framing is done.